DMA
  • DMA Card
    • Hardware Setup (Game PC)
    • FTDI Driver Setup (2nd PC)
    • Testing (2nd PC)
    • Troubleshooting
  • DMA Firmware
    • Firmware Flashing
  • HDMI Fuser
    • Fuser Overview
    • Fuser Setup
    • EDID Spoofing
  • KM Box
    • KM Box Net Setup
    • KM Box B+ Setup
  • MAKCU
    • Makcu Flashing
    • Makcu Driver
    • Makcu Setup
Powered by GitBook
On this page
  1. MAKCU

Makcu Driver

PreviousMakcu FlashingNextMakcu Setup

Last updated 3 days ago

  1. Download the driver .

  2. Extract to a folder.

  3. Right click and press install.

  1. On your second PC, go to Device Manager and open COM.

  1. Right click and click properties.

  2. Press Adcanced

  1. Pick a lower com port than 10, then press Ok to save.

  1. If you have the Makcu AIO tool open, close it and restart Makcu by unplugging and replugging the left most cable.

  2. After completing all the steps, the flash process should be complete.

here