DMA
  • DMA Card
    • Hardware Setup (Game PC)
    • FTDI Driver Setup (2nd PC)
    • Testing (2nd PC)
    • Troubleshooting
  • DMA Firmware
    • Firmware Flashing
  • HDMI Fuser
    • Fuser Overview
    • Fuser Setup
    • EDID Spoofing
  • KM Box
    • KM Box Net Setup
    • KM Box B+ Setup
Powered by GitBook
On this page

Last updated 1 month ago

Indicator Lights:

  • [D1]: Power indicator (solid light when powered on)

  • [D2]: Fusion function indicator (solid light when fusion is on, off when fusion is off)

  • [H2]: DP secondary input signal indicator (solid light when functioning normally)

  • [H1]: DP primary input signal indicator (solid light when functioning normally)

Button Functions:

  • Power: Power switch

  • [K1] Secondary Screen Mode – Displays only the 2nd PC screen while disabling the main screen

  • [K2] Main Screen Mode – Displays only the main PC screen while disabling the 2nd screen.

  • [K3] Fuser Activation & Adjustment – Enables the fuser and allows adjustment of its strength (black level).

  • [K4] Factory Reset & Re-engagement – Restores factory settings and re-engages the fuser if needed.

Port Guide:

  • HDMI Output: Connect to the primary display. (Only the fuser should connect to main monitor)

  • HDMI1: Connect to the GPU of your main PC.

  • HDMI2: Connect to the GPU of your secondary PC.

  • DC 12V: Power input.

  1. HDMI Fuser

Fuser Overview

PreviousFirmware FlashingNextFuser Setup
  • Indicator Lights:
  • Button Functions:
  • Port Guide: