DATA Driver Setup (2nd PC)

Ensure the DMA cable is properly connected to the DATA port for this step.

🔍 Check Your Current Driver Status

1. Open Device Manager (Windows key + type Device Manager)

2. Look for one of these scenarios:

✅ Correct Driver (No action needed)

• Device appears as: FTDI FT601 USB 3.0 Bridge Device

• Located under: Universal Serial Bus devices

• Status: Working properly → Skip this guide

⚠️ Missing Driver (Install now)

• Device appears as: FTDI SuperSpeed-FIFO Bridge

• Located under: Other devices

• Status: Yellow exclamation mark → Proceed below

❌ Wrong Driver (Remove first)

• Device appears as: FTDI SuperSpeed-FIFO Bridge

• Located under: Universal Serial Bus devices

• Action: Right-click → Uninstall device → Check 'Delete driver'

• Then proceed with installation below

⚙️ Driver Installation

📥 Step 1: Download Driver

Download Driver

• FTD3XX Driver v1.3.0.10 ← Click to download

Backup Driver (if above doesn't work):

• FTD3XX Driver v1.3.0.8 ← Click to download

⚙️ Step 2: Install Driver

1. Extract the downloaded .zip file

2. Run the .exe installer

3. Follow the installation wizard

4. Restart your computer if prompted

🔄 Step 3: Verify Installation

1. Re-open Device Manager

2. Should now see: FTDI FT601 USB 3.0 Bridge Device under Universal Serial Bus devices

3. If issues persist, try the backup driver

✅ The driver should now install successfully. You're now ready to proceed with DMA testing.

---