75t / 100t Firmware Flashing

75t / 100t Firmware Flashing Video

🔌 1. Connect to JTAG Port

Plug the USB cable into the JTAG port on your DMA card.

---

📦 2. Install JTAG Driver

Make sure the JTAG Driver is installed on your second PC.

---

📥 2. Download 75T Flashing Tool

Download the 75t / 100t Flashing Tool.

---

⚙️ 3. Configure Tool Settings

In the tool, set the fields as follows:

• If 75t - Field 1: xc7a75t

• If 100t - Field 1: xc7a100t

• Field 2: BIN

• Field 3: 10000000

---

📂 4. Select Firmware File

Click the button below the "FPGA" label and select your .bin firmware file.

---

▶️ 5. Flash the Firmware

Press the Flash button (located directly beneath the firmware selection).

---

✅ 6. Confirm Success

Once the process completes and the progress bar reached 100%, the flash was successful.

---

🚀7. Run a Speed Test

Run a Speed Test to confirm everything is working correctly.

---