search

tv1k Fuser Setup

hashtag
🖥️ 1. Initial Setup

  • Disconnect all displays except for the main monitor.

  • Connect the main monitor to the Fuser (not directly to the GPU).

  • Ensure all HDMI cables connected to the Fuser are HDMI 2.0.

hashtag
⚙️ 2. Configure Display Settings

On Both PCs:

  • Right-click on an empty area of the desktop.

  • Select Display Settings.

  • Scroll down to the Multiple displays section and select Extend these displays.

On the 2nd PC:

  • Go to Start > Settings > Personalization > Background/Wallpaper.

  • Under Personalize your background, select Solid Color and choose Black.

hashtag
🔌 3. Reconnect Cables to the Fuser

  • Ensure all three HDMI 2.0 cables are connected to the Fuser.

  • Make sure the monitor is no longer directly connected to the GPU.

hashtag
🛠️ Troubleshooting

🖱️ Desktop Apps Are Merged / Two Search Bars Visible

  • Press K2 (Main Screen Mode) when no overlay is active.

📺 Second Monitor Shows "No Signal"

  • Ensure the 2nd monitor is turned on.

  • The 2nd monitor should be connected to its respective PC, not the Fuser.

⚡ Refresh Rate Issues (Limited to 60Hz or 90Hz)

  • This indicates not all HDMI cables are HDMI 2.0.

  • Use three HDMI 2.0 cables for the Fuser setup.

hashtag
📌 Important Notes

  • The Fuser requires 3 HDMI 2.0 cables for full functionality.

  • Once set up correctly, switching modes (K1/K2/K3) will allow seamless integration between both PCs.

Previous1k Fuser OverviewNextEDID Spoofing

Last updated