35t Firmware Flashing

35t Firmware Flashing Video

🔌 1. Connect to JTAG Port

• Plug the USB cable into the JTAG port on your DMA card.

---

📦 2. Install JTAG Driver

Make sure the JTAG Driver is installed on your second PC.

---

🛠️ 3. Open Flashing Tool

• Download and launch the Flashing Tool.

• Click the blank button and select your firmware file.

---

▶️ 4. Start Flashing Process

• Press Start to begin flashing.

• The process should take about 1 minute to complete.

---

✅ 5. Confirm Completion

• Once you see the "Update Complete" prompt, the flash was successful.

• Restart the DMA device.

---

🔄 6. Reconnect for Data

• Switch the USB cable from the JTAG port to the DATA port on the DMA card.

---

🚀 7. Run a Speed Test

• Perform a Speed Test to ensure the card is functioning correctly.

---