DMA
  • DMA Card
    • Hardware Setup (Game PC)
    • FTDI Driver Setup (2nd PC)
    • Testing (2nd PC)
    • Troubleshooting
  • DMA Firmware
    • Firmware Flashing
  • Display Port Fuser
    • Fuser Overview
    • Fuser Setup
    • EDID Spoofing
  • KM Box
    • KM Box Net Setup
    • KM Box B+ Setup
Powered by GitBook
On this page
  1. DMA Firmware

Firmware Flashing

If you have purchased custom firmware, be sure to request it in a Support Ticket via our Discord Server.

PreviousTroubleshootingNextFuser Overview

Last updated 4 months ago

  1. Plug the USB cable into the JTAG port on the DMA card.

  2. Download the JTAG driver to your secondary PC's desktop.

  3. Install the JTAG driver.

  4. Download and open the Flashing Tool, click the blank button, and select your firmware file.

  5. Press Start to begin the flashing process. It should take about 1 minute to complete.

  6. Once you see the "Update Complete" prompt, the flashing process was successful, and the DMA device will need to be restarted.

  7. Next, switch the cable back over to the DATA port on the DMA card.

  8. Now you will want to run a Speed Test.